/*
 * Amiga specific bits in the battery-backedup ram.
 *
 *  Bits 0 to 31, inclusive
 */
/*
 * AMIGA_AMNESIA
 *
 *    The battery-backed up memory has had a memory loss.
 *    This bit is used as a flag that the user should be
 *    notified that all battery-backed bit have been
 *    reset and that some attention is required. Zero
 *    indicates that a memory loss has occured.
 */
CONST BATTMEM_AMIGA_AMNESIA_ADDR=0,
 BATTMEM_AMIGA_AMNESIA_LEN=1,
/*
 * SCSI_TIMEOUT
 *
 *    adjusts the timeout value for SCSI device selection.  A
 *    value of 0 will produce short timeouts (128 ms) while a
 *    value of 1 produces long timeouts (2 sec).  This is used
 *    for Seagate drives (and some Maxtors apparently) that
 *    don`t respond to selection until they are fully spun up
 *    and intialised.
 */
 BATTMEM_SCSI_TIMEOUT_ADDR=1,
 BATTMEM_SCSI_TIMEOUT_LEN=1,
/*
 * SCSI_LUNS
 *
 *    Determines if the controller attempts to access logical
 *    units above 0 at any given SCSI address.  This prevents
 *    problems with drives that respond to ALL LUN addresses
 *    (instead of only 0 like they should).  Default value is
 *    0 meaning don't support LUNs.
 */
 BATTMEM_SCSI_LUNS_ADDR=2,
 BATTMEM_SCSI_LUNS_LEN=1
